Tag Archives: hank of beads

Transferring Pre-strung Beads

Over at the KnitHeartStrings.com learn-and-knit-along site for Bits of Lace July 2012, we have been working on a beaded lace edging ornament. This project uses the “slip/slide a bead into place between stitches” method which requires that the beads to be strung onto your yarn/thread before knitting with the beads.

The pattern for Antique Satin and Lace Ornament that we are using (free for Bits of Lace members through the end of July 2012) briefly explains preparation instructions for both loose and pre-strung beads.

By pre-strung beads, I mean tiny beads that you buy in a hank that are strung on a temporary thread.

Hank of pre-strung beads
Hank of pre-strung beads

Actually, I seldom use pre-strung beads because I prefer to use and sell the high-quality Japanese beads that only come loose. But for craft-type items that are not going to be washed and/or take a lot of wear (like this month’s ball ornament project), if you have pre-strung beads, it is fine to use them. You can take advantage of the beads already being strung on temporary thread, and just transfer whatever quantity of pre-strung beads you need to the yarn/thread with which you will be knitting.

Here are step-by-step visuals to show you how I do this —

Begin by pulling the end on only one of the strands of beads loose from the knotted bundle, leaving the other ends still secured.

Loosen a strand from the knotted bundle
Loosen a strand from the knotted bundle

For most hanks, I’ve found that pulling a strand loose is easy to do, but some others are stubborn and I have to cut the strand near the knot and remove a few beads before proceeding.

You are going to need some space to make a knotted loop that will act as a “string needle eye” during the transfer. I do this one of 2 ways:

Option 1. While leaving the other end of the bead strand still secured in the bundled knot, remove a few beads as necessary to make space on the string to form a knotted loop. You can always re-string these loose beads later if you want. (Personally, I just toss the few stray beads like this in a pretty glass container that I keep on my bookshelf. One day I might do some kind of ad hoc project with the mixture I’ve been collecting, but for now I am just enjoying all the bead colors and sizes coming together like a serendipitous piece of art.)

Remove a few beads if necessary to make space on the string
Remove a few beads if necessary to make space on the string

Option 2. Clamp the first end you pulled loose, then pull the other end of that same strand free of the knotted bundle. By clamping one end tightly, you can move the beads toward the clamp without fear of them falling off the string, and gain an extra inch or two of space overall on the string — usually enough so that the space at the other end of the string is now enough that you don’t have to remove any beads.

Clamp one end and pull other end free
Clamp one end and pull other end free

Tie a compact, tidy overhand knot, leaving an open loop that will serve as the “eye” of the string needle. The eye does not have to be very big — just big enough so that you can get your yarn/thread through it. But it doesn’t hurt to be larger than you actually need either, because then it is easier for the next step.

Tie the end into a loop
Tie the end into a loop

Now insert your project yarn/thread through the knotted loop and pull through enough of a tail so that there is no fear of it coming out during the subsequent transfer of beads.

Pull project yarn/thread through knotted loop
Pull project yarn/thread through knotted loop

Slide some beads over the knotted loop …

Slide some beads over the knotted loop
Slide some beads over the knotted loop ...

… and onto the project yarn/thread.

Slide beads onto project yarn/thread
Slide beads onto project yarn/thread

Continue sliding beads from the pre-strung thread onto your project yarn/thread until all beads on the strand are transferred or as many as wanted.

Continue sliding beads from pre-strung thread onto project yarn/thread
Continue sliding beads from pre-strung thread onto project yarn/thread ...
until all beads on the strand are transferred or as many as wanted
... until all beads on the strand are transferred or as many as wanted

Then remove the project yarn/thread from the knotted loop, and you are ready to knit with your strung beads.

In some cases you may need more beads than on a single pre-strung strand. In this case, you can repeat the steps above with as many strands of pre-strung beads as needed.

In some cases, you will have remaining beads on the pre-strung strand that you don’t need right now. So you will want to secure the temporary thread in a way so that the remaining beads don’t fall off. This is what I like to do —

Tie a loop with a bead stopper
Tie a loop with a bead stopper
Slide beads towards end
Slide beads towards end
Beads won't fall off now
Beads won't fall off now

If you’ve pulled the other end of the strand loose from the knotted hank, make a bead stopper at that end, too, so the beads don’t fall off.

Tie other end with bead stopper
Tie other end with bead stopper

Hope you’ve enjoyed this little photo tutorial and learned a thing or two along the way.

Interested in some more knitting with bead tips and techniques? Check out other bead information resources I’ve prepared.

Happy knitting and beading!

Related Images: